SRETURN TO HOME PAGE About Us Gallery FAQ's Contact Us      

NEW ARRIVALS

CUSTOM MODELS SECTION

TALLSHIPS  MODERN YACHTS CLASSIC SPEED BOATS OCEAN LINERS SAILING BOATS FISHING BOATS WAR SHIPS HALF-HULLS WALL PICTURES DISPLAY CASES COMMERCIAL SHIPS NAUTICAL FURNITURE

CHRIS CRAFT RUNABOUT - 1930

Our model is hand-crafted from hard wood with planks on frame. This model is not a kit and ready for display. All the metal fittings and strips are brass and chromed as stainless steel. Model can be built ready for RC.

Item Code

Specifications

Packing Volume

SB0080P-60

SB0080P-80

62L x 18W x 20H (cm)

82L x 23W x 23H (cm)

24.40L x  7.08W x  7.87H (inch)

32.28L x  9.06W x  9.06H (inch)

0.054 m³ = 1.90 ft³

0.07 m³ = 2.47 ft³

.
Chris Craft Runabout 1930 model boat

1930 Chris Craft Runabout

Wooden Model Boat Chris Craft Runabout

wooden model boat chris craft

Chris Craft boat

Chris Craft model

Hand-crafted Chris Craft Model

Chris Craft Boat

 

>>Any other colors for the upholstery upon enquiry is possible

Packing the model (below picture illustrate how the boat is packed)

Packing for Chris Craft Ready for Shipping Worldwide

HISTORY

The legend of Chris-Craft began in 1884, when Christopher Columbus Smith began the Smith Boat House on the St Clair River in Algonac, Michigan, to manufacture small duck boats and power launches. Later, the company was extended to Chris Smith and Sons Boat Co. Many of his larger runabouts were used as taxis; transporting guests on the river front to resorts, or to various sightseeing attractions. In the twenty's, mostly runabouts were produced, but with the introduction of his speed boats, Chris Smith's fame took off.

Chris-Craft was the largest producer of mahogany boats in the country. In one year alone, one million feet of mahogany was delivered. Truck load after truck of Philippine Mahogany would arrive at the factory daily. No wood was ever wasted either. First, the lumber was air dried; then various hull parts were laid out using templates and patterns, were cut into plugs to be cemented into the counter sunk holes of the screws. All scraps were burned in the furnace for fuel.

In January of 1930, the Smiths introduced their most ambitious offerings to date, twenty-four models of boats. It was a clear signal to both consumers and the marine industry that Chris-Craft was not affected by wide spread rumors of impending disaster as a result of the crumbling American economy. "here they come", an article begins, "a long line of 24 new Chris-Craft - the largest and most complete motor boat spectacle ever presented.

Indeed, no other manufacturer in the world could offer such diversity and value. The review of the 1930 Chris-Craft fleet in Motor Boating reveals the increased emphasis on the higher end.

This beautiful 1930 - 28' Runabout was one of first quality pleasure power boats that was affordable. But the truth be known...these boats flourished during Prohibition with the demand for speed in water transportation. The remote areas along waterways on the Great lakes, upstate New-York and the Eastern shore were havens for gin mills. Both bootleggers and the Law required fast efficient transportation to travel to out-of-the way areas.
 

 

  Interior with different color for your choice

 Suggest: Display case to preserve the model from dust

This assembly display case comes with plexiglass.

 

 

 

back to top To Top of the Page

RETURN TO HOME PAGE